Urban News

  • Increase font size
  • Default font size
  • Decrease font size
Urban Planning

Concrete solution: Improve drains, check leaks on roads

Print PDF

The Deccan Chronicle  02.09.2010

Concrete solution: Improve drains, check leaks on roads

The recent announcement by the Chief Minister that concrete roads would be laid in heavily congested corridors was met with mixed reactions. Sceptics felt that concrete roads would reduce water seepage and lower the ground water table. But if that was true, why would the developed world make most urban roads concrete?

It is important to understand that water has a detrimental effect both on the asphalt and the road structure itself. The infamous pothole is formed when water seeps into the asphalt and strips it from the aggregate or jelly, due to inadequate surface drainage. This water then proceeds to erode the base and sub-base of the road structure resulting in a loss of support and a cave-in, that we commonly refer to as a pothole.

In the long term, concreting the major arteries that carry significant volumes of traffic will definitely give us longer lasting roads. It will cost more but last for over 20 years with little maintenance.

The immediate solution for the existing asphalted roads is simple. The roadside drainage system must be improved to prevent water logging. A coordinated approach with the BWSSB will ensure that water leaks are fixed before the subgrade erodes and results in potholes. A full depth repair of the existing potholes as compared to a patch fix will ensure a smooth ride for the taxpaying commuter.

(The author is advisor to the government of
Karnataka and a member of the infrastructure sub-committee, CiSTUP, IISc.)

Last Updated on Thursday, 02 September 2010 05:40
 

Sustainable way to combat water hardness

Print PDF

Hindustan Times  31.08.2010

Sustainable way to combat water hardness
When everyone is looking up to the government to solve civic issues, S.K. Maheshwari, a resident of Brij Vihar in Ghaziabad, installed a rainwater harvesting well (RHW) inside his house to improve the quality of groundwater. According to experts, the RHW is one of the most effective ways to improve
the quality of groundwater. The water hardness can be reduced this way, though it takes several years.

Maheshwari uses a normal water purifier for drinking water while he has spent around Rs 15,000 to install the RHW system. "The RHW is scientifically designed and only fresh-water is allowed through a three-stage process. We don’t allow waste water to seep into the ground through RHW as it contaminates the groundwater," Maheshwari said.

He believes in optimum use of water and uses waste water from kitchen, bathrooms in his garden.

"This  way  we  are  making  effective  use  of waste water and ensure that underground water  gets  saved from contamination. Every individual should install  a  RWH  plant  to  recharge  and  save  groundwater  from contamination and hardness," he added. He also uses water from the AC to wash his cars.

Last Updated on Tuesday, 31 August 2010 11:46
 

PCMC readies to install rain gauge

Print PDF

The Times of India  31.08.2010

PCMC readies to install rain gauge

PUNE: The Pimpri-Chinchwad Municipal Corporation (PCMC) is scouting for land for the installation of a rain gauge in the municipal limits. Once the installation is completed, citizens in Pimpri-Chinchwad would be able to know the rainfall in the twin township.

Speaking to TOI, Mustafa Phadnis, assistant commissioner, PCMC said, "The Indian Meteorological Department (IMD), Pune, has given permission to install the rain gauge in the municipal limits to measure the rainfall."

Phadnis said, "PCMC wanted to install the rain gauge on top of its main office building in Pimpri. But, as per IMD norms the rain gauge cannot be installed on the terrace of any building. The norms stipulate that the rain gauge has to be installed in an open plot with an area of 1,000 to 1,500 sq ft. There should be no trees or building on the plot to ensure that the maximum amount of rain is collected to give accurate readings."

"There will be no difficulty in getting such land. It can be installed at any one of our municipal properties scattered across the municipal limits. The IMD officials will be shown the plots and it will be finalised after their permission. We hope to finalise the plot in a week," replied Phadnis when enquired about the location for the rain gauge.

Speaking to TOI, Kiran Gawde, chief fire officer, said, "The civic body will also have to consider the security of the plot. The IMD will later give training to the civic employees about taking the readings. The PCMC has already bought the rain gauge".

Pimpri-Chinchwad township, with a population of more than 15 lakh, is known as an industrial township. There is no rain gauge installed in the township. It relies on the rainfall figures given from the rain gauge installed near the Pavana dam. But, the rainfall figures from the dam do not give a clear picture.

The flood control cell of the PCMC will be able to utilise the data during monsoons to predict floods.

Last Updated on Tuesday, 31 August 2010 11:38
 


Page 200 of 328